Ball float steam traps have an integral air vent as standard and the options of a manually adjustable needle valve and drain cock tapping, the Ball floating range is adaptable to all applications where ball float traps are recommended and instantaneous removal of condensate is required.
Features
Size : DN15-DN100, 1/2″-4″
Nominal Pressure : Class150-class300, PN10-PN64
Body Material : Cast or Forged body in Cast Iron, Carbon Steel, Stainless Steel, or Duplex.
Trim : Stainless Steel SS304 trim as standard
Ends : Flanged FF,RF,RTJ
Standard : ASME B16.34, DIN3202, ASME b16.10, MSS SP-71，BS EN558，ASME B16.5 CL150，EN1092，EN12226，ISO5208，API598
Applications of Lever Ball Float Steam Traps
The lever ball float steam trap can be installed in steam equipment, high pressure sterilization device, air condition equipment, heat exchanger, and more. It is widely used in petroleum, chemical, food, papermaking, metallurgy industries.
Flanged Ball Float Steam Trap FT14
The FT14-F is ball float steam trap having stainless steel working internals and integral automatic air venting facility. The FT14-F can be maintained without disturbing the pipework.
Available types
FT14 (R-L) Horizontal connections with flow from right to left
FT14 (L-R) Horizontal connections with flow from left to right
FT14 Thread ends
| Limiting Condition | ||
| Body design conditions | PN16 | |
| PMA Maximum allowable pressure | 16 bar g @ 100°C | |
| TMA Maximum allowable temperature | 250°C @ 13 bar g | |
| Minimum allowable temperature | -10°C | |
| RMO Maximum operating pressure for saturated steam service | -14 bar g | |
| TMO Maximum operating temperature | 250°C @ 13 bar g | |
| Minimum operating temperature | 0°C | |
| PMX Maximum differential pressure | FT14-4.5 | 4.5 bar |
| FT14-10 | 10 bar | |
| FT14-14 | 14 bar | |
| Designed for a maximum cold hydraulic test pressure of 24 bar g | ||
FT44 Flanged ends
| Limiting Condition | ||
| Body design conditions | PN40 | |
| PMA Maximum allowable pressure | 40 bar g @ 100°C | |
| TMA Maximum allowable temperature | 300°C @ 27.5 bar g | |
| Minimum allowable temperature | 0°C | |
| maximum cold hydraulic test pressure | 60 bar g | |
| PMO Maximum operating pressure for saturated steam service | 32 bar g@239°C | |
| TMO Maximum operating temperature | 300°C @ 27.5 bar g | |
| Minimum operating temperature | 0°C | |
| PMX Maximum differential pressure | DN15 ,20,25 | FT44-4.5(4.5 bar) |
| FT44-10 (10 bar) | ||
| FT44-14 (14 bar) | ||
| FT44-21 (21 bar) | ||
| FT44-32 (32 bar) | ||
| DN40,50 | FT44-4.5(4.5 bar) | |
| FT44-10 (10 bar) | ||
| FT44-21 (21 bar) | ||
| FT44-32 (32 bar) | ||
Capacities
|
FT14-16
|
15-20
|
Thread
|
0.01-1.6
|
250
|
125
|
155
|
55
|
55
|
155
|
|
FT14-16
|
15-25
|
Thread
|
0.01-1.6
|
250
|
190
|
220
|
120
|
80
|
140
|
|
FT44-16
（FT43） （FT46） |
15-20
25 |
Flanged
|
0.01-1.6
|
350
|
195
215 |
255
|
85
|
115
|
110
|
|
32-50
65-80 |
Flanged
|
0.01-1.6
|
350
|
230
270 |
345
420 |
175
218 |
110
125 |
190
220 |
|
| SUNA23H26 |
15-20
25 32-50 |
Flanged
|
0.01-4.0
|
350
|
195
215 230 |
145
235 |
60
125 |
90
145 |