FHM500 is very unique in its structural design. It uses a circular magnetic steel to achieve automatic connection during installation.
It takes only 2-3 minutes to complete the whole process from installation to measurement. It also adopts the current popular OLED display, which makes it easy to read in low light conditions.
FHM500 is widely used in the production process for flow measurement and monitoring. The application of the product continuously and effectively controls the flow of the fluid, so as to improve the yield of the product and even save the input of the personnel, bringing benefits to the production enterprise.
FHM500 can meet different pipe requirements: stainless steel pipe, carbon steel pipe, copper pipe, plastic pipe (PVC, PVDF, PPR, PPH, HDPE, etc.).
FHM500 also satisfies different clean fluid measurements: various acids, alcohols, chemical solvents, alcohol, beverage water, Coca-Cola water, etc.
Parameter :
| Flow range | 0.1 m/s ~ 5.0 m/s |
| Accuracy | ±2.0% |
| Repeatability | 0.8% |
| Measuring pipe diameter | DN15-DN50, a total of 6 specifications |
| Storage function | With daily, monthly and annual flow accumulation function |
| Analog output | 4-20mA, 600Ω maximum load |
| Alarm output | OCT upper and lower limit alarm function (optional) |
| Communication interface | RS485 supports Modbus communication protocol |
| Power supply | 24VDC |
| Cable length | 1.8m |
| Keyboard | Four touch buttons |
| Display | OLED 128 * 64 dot matrix display |
| Unit | Support metric and inch units selection, Cubic Meters (m³), Liters (L), USA Gallons (GAL), press / hour (hourly), / min (minutes), factory default unit is m³ / h |
| Totalizer | 6-bit flow accumulator |
| Suitable pipes | Stainless steel, carbon steel, copper pipe, plastic pipe |
| Shell material | Aluminum alloy |
| Ambient temperature | 0℃-50℃ |
| Medium temperature | 0℃-50℃ |
| Environment humidity | Relative humidity ～, no condensation |
| Protection level | IP54 |