FHS330 is a wall-mount, clamp-on type ultrasonic flowmeter which use the transfer time technology. Clamp on type ultrasonic flowmeter is easy to install and no need to cut off the pipe, that saves you lots of troubles and cost. At the same time, It has our unique calculate software to ensure the high accuracy and low velocity response.
FHS330 flowmeter could add the RTD model and temperature sensor become an energy meter to monitoring the energy use, help to save the energy.
Parameter :
| Flow range | ±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) |
| Accuracy | ±0.5% of measured value |
| Repeatability | 0.1% of measured value |
| Linearity | ±0.5% |
| Pipe size | DN25mm~DN5000mm(A pair of sensors) |
|
Outputs |
Analog output: 4~20mA, max load 750Ω .
Pulse output: 0~9999Hz, OCT (min. and Max. frequency is adjustable) Relay output: SPST, Max 1Hz(1A@125VAC or 2A@30VDC) |
| Communication | RS232/RS485 Modbus |
| Power supply | 10~36VDC/AC90~245V |
| Display | 240*128 backlit LCD |
|
Temperature |
Transmitter: -14℉~140℉(-20℃~60℃)
Transducer: -40℉~176℉(-40℃~80℃,TT01) Transducer: -40℉~266℉(-40℃~130℃,TT03) Transducer: -40℉~356℉(-40℃~180℃,TT02H) |
| Humidity | Up to 99% RH,non-condensing |
| Transmitter | PC+ABS,IP65 |
|
Transducer |
Encapsulated design,IP68
Double-shielded transducer cable Standard/maximum cable length:30ft/1000ft(9m/300m) |