PM4211 0-100 Psi Pressure Transducer 4-20ma

PM4211 4PIN Hirschmann 0-100 psi pressure transducer 4-20ma adopts high-precision, high-temperature qualitative force-sensitive chip with stainless steel metal diaphragm. After strict precision temperature compensation, signal amplification, V/I conversion, the pressure parameters are reliably converted into industry standard 4 ~20mA or 0~10mA signal output, widely used in petroleum, chemical, metallurgy, electric power, textile, environmental protection and other field.

Parameter :



Range -0.1MPa…0kPa~10kPa…100MPa
Overload capability Below 10MPa ≤ 2 times full scale
10MPa and above ≤1.5 times full scale
Pressure Type G (gauge pressure), A (absolute pressure), S (sealed gauge pressure)
Accuracy 0.1% (custom), 0.25% (typical), 0.5% (maximum)
Long-term stability ±0.1%FS/year (typical), ±0.2%FS/year (maximum)
Zero temperature drift ±0.03%FS/°C (≤100kPa), ±0.02%FS/°C (>100kPa)
Sensitivity temperature drift ±0.03%FS/°C (≤100kPa), ±0.02%FS/°C (>100kPa)
Compensation temperature 0°C~50°C(≤100kPa), -10°C~70°C(>100kPa)
Medium temperature -40°C~80°C
Power supply +12 ~ +36V (Default 24V)
Output Signal 4mA~20mA, 0V~10V (output range can be customized)
Load Resistance Current type: ≤ (U-12) / 0.02 (Ω)
Response time ≤1(10~90%)ms
Measuring medium All corrosive gases, liquids compatible with 316L
Diaphragm material 316L stainless steel
Housing material 1Cr18Ni9Ti
Interface M20×1.5 or customized
Protection level IP65 (customizable IP68)

Leave a Reply

Your email address will not be published. Required fields are marked *